Gauge
Rotor
Fig.2
Fig.3
Fig.4
3
2. Engine Assembling
The carburetor, muffler, air-funnel and sensor are not assembled at factory.
Make sure that the assembling for such parts are done according to the 2.1 and 2.2.
Tightening torques: see page 9
1. Bolt (01252-30550)
2. Muffler (T2075-15110)
3. Gasket (1140-13141)
4. Screw (0263-30408)
5. Engine
6. Gasket (T2075-13150)
7. Carburetor (T2075-81000)
8. Lever, choke (T2070-82410)
9. Air-funnel (848ES08300)
10. Spacer (1142-83110)
11. Screw (0263-30555)
Make sure that gasket and carburetor are mounted as the picture.
If carburetor is mounted upside down position, the engine does not start as
carburetor does not work correctly.
CAUTION
Fig.1
Fig.2: Affix the gauge to magneto.
Fig.3: Turn the crankshaft until gauge
position at top.
Fig.4: Fix the sensor on the mount while
pushing the sensor.
• Take away the gauge from the rotor.
Carburetor muffler and air-funnel assembling
2.1
Sensor assembling
2.2
