![background image](http://html1.mh-extra.com/html/zenoah/g260pu-ei/g260pu-ei_owners-service-manual_930532010.webp)
10
13. Service Guide
1. REMOVING PISTON PIN
(Fig.9)
1) Remove snap rings from both sides of the
piston pin.
2) Engage the rod assy(1101-96220) to the
piston pin and gently tap with a plastic
hammer to push out the pin while holding
piston firmly.
Hard hammering may damage the big end of
the connecting rod.
2. INSTALLING PISTON
(Fig.10)
1) Make sure to point the arrow mark on the
piston to the exhaust side.
2) Fit the circlip in the groove so as to face the
end gap below.
Deformed circlip may come off during engine
operation and damage the engine.
CAUTION
CAUTION
Fig.9
Fig.10
12. Special Tools
Part Name
Part No.
External Appearance
Usage
1
Puller Assy
1490-96101
To remove rotor.
2
Piston Stopper
4810-96220
3
Rod Assy
1101-96220
To remove/install piston pin.
4
Hex Wrench
3304-97611
5
Snap Ring Pliers
5500-96110
To remove snap ring.
To hold crankshaft when
disassembling/assembling
the rotor.
For socket screw of
4mm, 5mm and 6mm.