background image

G
B

15

Should any failure occur on the product under

normal operating conditions within the applicable

warranty period, the failed part will be replaced or

repaired free of charge by a ZENOAH authorized

dealer.

WARRANTY PERIOD: Six (6) months after purchased

by end-user subject to 12 months from produced month.

(30 days if used for rental purpose)

THE PURCHASER SHALL BEAR COSTS OF

TRANSPORTING THE UNIT TO AND FROM THE

ZENOAH DEALER. 

THE PURCHASER SHALL NOT BE CHARGED FOR

DIAGNOSTIC LABOR WHICH LEADS TO THE

DETERMINATION THAT A WARRANTED PART IS

DEFECTIVE, IF THE DIAGNOSTIC WORK IS

PERFORMED AT THE ZENOAH DEALER.

THE PURCHASER OR OWNER IS RESPONSIBLE

FOR THE PERFORMANCE OF THE REQUIRED

MAINTENANCE AS DEFINED BY THE

MANUFACTURER IN THE OWNER/OPERATOR

MANUAL.

ANY WARRANTED PART WHICH IS NOT

SCHEDULED FOR REPLACEMENT AS REQUIRED

MAINTENANCE, OR WHICH IS SCHEDULED ONLY

FOR REGULAR INSPECTION TO THE EFFECT OF

REPAIR OR “REPLACE AS NECESSARY” SHALL BE

WARRANTED FOR THE WARRANTY PERIOD. ANY

WARRANTED PART WHICH IS SCHEDULED FOR

REPLACEMENT AS REQUIRED MAINTENANCE

SHALL BE WARRANTED FOR THE PERIOD OF TIME

UP TO THE FIRST SCHEDULED REPLACEMENT

POINT FOR THE PART.

ANY REPLACEMENT PART THAT IS EQUIVALENT IN

PERFORMANCE AND DURABILITY MAY BE USED IN

NON-WARRANTY MAINTENANCE OR REPAIRS, AND

SHALL NOT REDUCE THE WARRANTY OBLIGATION

OF THE COMPANY.

THE COMPANY IS LIABLE FOR DAMAGES TO

OTHER ENGINE COMPONENTS CAUSED BY THE

FAILURE OF A WARRANTED PART STILL UNDER

WARRANTY.

THE WARRANTY DOES NOT APPLY TO

THOSE

UNITS WHICH HAVE BEEN DAMAGED BY

NEGLIGENCE OF INSTRUCTION LISTED IN THE

OWNER/OPERATOR MANUAL FOR PROPER USE

AND MAINTENANCE OF THE UNITS ACCIDENT

MISHANDLING, ALTERATION, ABUSE, IMPROPER

LUBRICATION, USE OF ANY PARTS OR

ACCESSORIES OTHER THAN THOSE SPECIFIED BY

THE COMPANY, OR OTHER CAUSES BEYOND THE

COMPANY'S CONTROL.

THIS WARRANTY DOES NOT COVER

THOSE

PARTS REPLACED BY NORMAL WEAR OR

HARMLESS CHANGES IN THEIR APPEARANCE.

THERE ARE NO OTHER EXPRESS WARRANTIES.

ANY IMPLIED WARRANTY

is limited to the duration of

the limited warranty. Otherwise, this limited warranty is

in lieu of all other expressed or implied warranties,

including any warranty of 

FITNESS FOR A

PARTICULAR PURPOSE OR USE

and any implied

warranty 

MERCHANTABILITY

otherwise applicable to

this product. 

LIABILITIES FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGE UNDER ANY AND ALL

WARRANTIES ARE EXCLUDED.

IF YOU NEED TO OBTAIN MORE INFORMATION,

PLEASE CALL YOUR NEAREST SERVICE CENTER,

OR CHECK PLEASE ZENOAH WEB SITE:

http://www.zenoah.net

Limited warranty

Summary of Contents for BC4350FW
















Reviews: