MINiBOX 20
http://www.zennio.com
Technical Support:
http://support.zennio.com
7
2.
CONFIGURATION
2.1
GENERAL
After importing the corresponding database in ETS and adding the device into the
topology of the desired project, the configuration process begins by entering the
Parameters tab of the device.
ETS PARAMETERISATION
From the General parameter screen it is possible to activate/deactivate all the required
functionality.
Figure 2.
General
Once activated,
Outputs, Logic Functions, Scene Temporisation
and
Manual control
bring additional tabs to the menu on the left. These functions
and their parameters will be explained in later sections of this document.
The
Manual Control
function is enabled by default, and so is the
corresponding configuration tab.
Sending of Indication Objects (0 and 1) on Bus Voltage Recovery
: this
parameter lets the integrator activate
two new communication objects (“
Reset
0
” and “
Reset 1
”), which will be sent to the KNX bus with values “0” and “1”
respectively whenever the device begins operation (for example, after a bus
