ZENN
iO
AVANCE Y TECNOLOGÍA
www.zennio.com
1
9
Once the limitation is enabled, when a value out of the range is sent from the bus
KNX, the value that will be sent to Daikin unit will be the corresponding temperature
limit and this new temperature value will be notified to the bus KNX.
As a new functionality, it has been included a 1-bit communication object that will
allow the user enabling (object to “1”) or disabling (object to “0”) these personalized
temperatures restoring the Daikin default range.
Take into account:
When configuring in ETS the temperature limitation, this
functionality is automatically enabled by default and the personalized ranges will
control the unit performance when it switches on.
4.7. AUTOMATIC SWITCH OFF
When this option is enabled, the air conditioning unit will be temporarily switched off
if a status change in the associated binary communication object is produced.
This functionality has two configurable parameters:
Delay for Auto-OFF
: Number of seconds that KLIC-DI delays the air
conditioning unit switching off.
4.8. ERRORS MANAGEMENT
The Errors Management window allows enabling the sending of messages to the
bus indicating any error that may arise: internal errors of the communication between
the KLIC-DI and the Daikin unit or external errors, errors in the own Daikin unit.
It can be enabled the internal errors, the external errors or both:
Internal Errors
: Yes or no.
External Errors
: Yes or no.
Figure 14 Auto-OFF
