Zennio inBOX 24 vT, Manual

Page: 9 / 33

inBOX 24 vT / inBOX 20 vT
https://www.zennio.com Technical Support: https://support.zennio.com
9
2.2 INPUTS (ONLY inBOX 24 vT)
inBOX 24 vT incorporates four analogue/digital inputs , each configurable as a:
Binary Input , for the connection of a pushbutton or a switch/sensor.
Temperature Probe , to connect a temperature sensor from Zennio or NTC
probes from third parties (the latter requires configuring their parameters in
ETS).
Motion Detector , for the connection of a motion detector from Zennio.
2.2.1 BINARY INPUT
Please refer to the specific user manual “
Binary Inputs
”, available in the inBOX 24 vT
¡product section, at the Zennio website ( www.zennio.com ).
2.2.2 TEMPERATURE PROBE
Please refer to the specific user manual “
Temperature Probe
”, available in the inBOX
24 vT product section, at the Zennio website ( www.zennio.com ).
2.2.3 MOTION DETECTOR
It is possible to connect motion detectors from Zennio to the input ports of inBOX 24
vT.
Please refer to the specific user manual “
Motion Detector
”, available in the inBOX 24
vT product section, at the Zennio website ( www.zennio.com ), for detailed information
about the functionality and the configuration of the related parameters.