DALIBOX Interface 64/32
Technical Support:
36
➢
Ballast Physical Minimum
: minimum luminosity value that the ballast is
actually able to produce, as specified by the manufacturer. This determines
the actual luminosity level that will correspond to a dimming percentage of
1%.
Note
:
physical minimum must be configured as indicated in the ballast or in
the datasheet.
➢
Economic Mode
: maximum luminosity level the ballast will be allowed to
reach. It determines the actual luminosity level that will correspond to a
dimming percentage of 100%.
Dimming Limits
: perceptible limits that allow restricting the percentage value
range of the control objects. Note that the actual meaning of the values of these
objects depends itself on the luminosity limits configured. The effect of these
limits over the dimming times is explained in section 2.1.
➢
Minimum Dimming Value
: lower dimming percentage allowed. The load
will remain at this level in case of receiving a lower value (only switch-off
orders will be handled).
➢
Maximum Dimming Value
: upper dimming percentage allowed. The load
will remain at this level in case of receiving a greater value.
The dimming curve takes into account all the above limits.
ETS PARAMETERISATION
The ‘
Limits
’ tab provides the following options:
Figure 15.
Limits
