Zennio ALLinBOX 1612 v2, Manual

Page: 9 / 51

ALLinBOX 1612 v2
http://www.zennio.com Technical Support: http://support.zennio.com
9
Overload LED (OVERLOAD) : notifies a high consumption in the power
supply.
➢
OFF: device with low power consumption.
➢
ON (red): device with too high consumption.
➢
BLINKING (green): short circuit in the power supply.
Programming LED :
➢
OFF = normal operation.
➢
ON (red) = programming mode active.
IP Factory Reset LED:
➢
OFF: normal operation.
➢
ON (red): IP restored by DHCP.
➢
ON (green): static IP (of ETS configuration) restored.
➢
ON (yellow): IP restored by APIPA.
Note : Please refer to section 1.5 for further details.
Reset LED:
➢
OFF: normal operation.
➢
ON (red): while the button is pressed (power supply is reset) and short
circuit in the power supply.