Flame intensity will not
accurately match illustrations
on the flame indicator.
CAUTION :
!
TURNING ON
THE GAS COOKER
TURNING OFF
THE GAS COOKER
1.
3.
•
Gas cookers
without SAFETY SENSOR:
i. Push in the ignition knob fully.
ii. Turn anti-clockwise towards
the
[ON]
position.
•
Gas cookers
with SAFETY SENSOR:
i. Push and turn anti-clockwise
towards the
[ON]
position.
(hold down for 5 seconds)
•
Turn the ignition knob clockwise
towards the
[OFF]
position.
You will then hear a
‘CLICK’
sound.
This is a signal that the gas cooker
has been correctly turned off.
NOTE :
Sometimes, a
“POP”
sound can
be heard when the burner is
turned off. This is normal.
Clic
k !!
Pu
sh i
n
FULLY & Tu
r
n
A
n
ti-C
lo
ck
w
is
e
•
Release the knob and check if the
flame has been ignited. If no flame is
detected, turn the knob to
[OFF]
position and repeat the above steps.
•
When the burner has been ignited,
adjust the knob to achieve the
desired flame intensity.
Note:
It will take longer for ignition to occur
if the gas cooker has not been used
for installed for a long period of time.
Pu
sh
i
n
F
U
LL
Y
&
H
old f
or 5 S
e
co
n
ds
Th
en
, T
ur
n
A
n
ti-Clo
ckwis
e
CONTROLLING
THE FLAME
2.
• Small Burner Cap
& Main Burner
:
• Small Burner Cap
& BurnerCap
:
• Small Burner Cap
& Burner Cap
:
• Lowest flame setting.
•
Small Burner Cap
:
MEDIUM FLAME
•
Burner Cap:
LOW FLAME
TU
RN
O
FF
No
Flame
Zone
OPERATING THE IGNITION (TURN TYPE)
• Small Burner Cap: LOW FLAME
• Burner Cap: NO FLAME
MEDIUM TO HIGH
OR
HIGHEST FLAME
LOW TO MEDIUM
OR
MEDIUM FLAME
LOW TO NO
OR
NO FLAME
8
LEGEND :
High Flame
Low Flame
Medium Flame
Small
Burner Cap
Burner
Cap
