P A G E 5 7
206-3674
Programming the Remote
Test your remote control
To find out whether your remote control can
operatea component without programming,
turn on the component such as the VCR and
press the corresponding mode button (VCR)
on the remote control while pointing at the
component. Test the
POWER
and
CH +/-
buttons to see if the component responds
properly. If not, it requires programming.
Turn on the component to be programmed.
Then press the corresponding mode button
on the remote control.
Press the POWER button and the MUTE but-
ton simultaneously. Then the remote control
is ready to program the code for the corre-
sponding component.
There are two ways to find the right code of
the component.
First, if you press the
CH +/-
buttons
repeatedly, the code will change one at a
time.
Second, enter the code number using the
digit buttons on the remote control The
right code numbers for the corresponding
component can be found on the following
pages.
Press the EXIT button to store the program.
Test the remote control functions if the
component responds properly. If not, repeat
from step 2.
1
1
2
3
4
5
6
7
8
9
0
tv
mode
light
power
tv
video
front
comp1
xga
vcr cable dvd sat
mute
vcr+ freeze flashbk pip
menu
record stop
pause rew
play
ff
exit
guide
surf
info
vol
ch
pg up
ratio
pg dn
comp2
skip
source
enter
2/4
2
2
3
4
5
6
3
The remote control of your HD receiver is a multi-
brand or universal remote control that can be
programmed to control most remote-controllable
components of other manufacturers.
Note that the remote control may not control all
models of other brands.
Summary of Contents for IQD61W20
Page 70: ...P A G E 7 0 206 3674 Notes...
Page 71: ...P A G E 7 1 206 3674 Notes...
