Zenith D60WLCD Series, Installation And Operating Manual, Warranty

Page: 25 / 60

P A G E 2 5
206-03726
PIP/POP/SPLIT Sources
Press the PIP button on the remote con-
trol in PIP mode to activate POP (Picture
-out-of-Picture) mode.
Press the EXIT button to exit POP mode
or press the PIP button again to activate
Split mode.
Press the LEFT/RIGHT arrow in Split
mode to select CH+/-, Swap, or Source.
• CH+/-: Use the UP/DOWN arrow to
select a program for the sub picture.
Changing programs in the sub picture
is only possible if the PIP source is
NTSC RF signal.
To change the program for the main
picture, use ch +/- button.
• Swap: Use the UP/DOWN arrow to
swap main and sub pictures.
• Source: Use the UP/DOWN arrow to
select a source for sub picture.
Your choices are : TV, Video1/2, Front,
Component 1/2.
RGB-PC input cannot used for the PIP
picture source.
Press the EXIT button to exit Split mode.
3
4
2
1
1 2 3
4 5 6
7 8 9
0
tv
mode light power
antenna
video front
comp1 rgb
vcr cable dvd sat
mute
swap pipch- pipch+ pip
menu
record stop
pause rew
play ff
exit
flashbk surf
freeze
vol ch
ratio
comp2
skip
source
enter
2/4
3
3
3
1/2
Press the FREEZE button to capture and
freeze the currently-viewed sub picture in
PIP or Split mode.
Do not display a fixed image on the
screen for long periods of time.