Zenith C13A03D, Instruction Manual

Page: 37 / 59

P A G E 3 8
206-3643
PRG
POWER
CABLE
VCR
AUX TV
SURF
ENTER
FLASHBK MUTE
CHANNEL
CHANNEL
VOLUME VOLUME
1 2 3
4 5 6
7
0
8 9
MENU
REWIND FFWD
RECORD
QUIT
A
B C
CC
TV/VCR
SOURCE
PAUSE TIMER
PLAY
STOP
Amplifier Volume Override
5
2/3
Indicator Light
Mini glossary
AMPLIFIER An electronic device that amplifies sound from a television, CD player, VCR, or other A/V device.
1
2
3
4
Your volume and mute keys now control your amplifier, while all
the other keys still operate the Destination II PC/TV. To put
everything back to normal, reprogram all modes with their origi-
nal codes (see the “Programming Your Remote” page).
If you can’t find the code for your amplifier, use the Auto Find
feature.
Sets up your amplifier to be operated in
all remote control modes
4
Find the code that operates your amplifier. Test it to
make sure it’s the correct one by following the proce-
dure in “Programming Your Remote” on the previous
page.
Program your audio system into the CABLE or one of
the available AUX modes.
Select the mode you want amplifier volume to appear
(e.g. TV).
Press and hold PRG on your remote until the indicator
light stays lit, then release.
Press 4-9-9; then ENTER on the remote. The indicator
light will flash three times the code was accepted.
Audio system volume/mute now appears in the mode
selected.
Note: You can also program Cable Box Volume and
Mute control (if available) into your cable box mode
(CABLE or AUX mode) by repeating the steps for pro-
gramming on the previous page but entering 3-9-9,
instead of a brand code, then pressing ENTER.
5