Zenith B27A34Z, Operating Manual

Page: 40 / 52

Mini glossary
AUX Auxiliary equipment. Can be any equipment which does not have a dedicated key on your remote like Cable or VCR.
Typically a second VCR, stereo system, audio tape deck, etc.
Aux-1, Aux-2, Aux-3
1
2
3
4
5
6
Control up to seven different devices with your remote
PRG
CABLE VCR AUX TV
ENTER
FLASHBK
CHANNEL
CHANNEL
1 2 3
4 5 6
7
0
8 9
MENU
REWIND
RECORD
PIP
SWAP
FREEZ
PAUSE TIMER
PLAY
STOP
SURF
MUTE
POWER
VOLUME VOLUME
QUIT
CC
FFWD
TV/VCR
SOURCE
4
2
5
6
206-3481
Programming your Zenith remote may allow you to use one remote to
work up to 7 different products or devices.
Some devices may not work with your Zenith remote control.
P A G E 4 0
3
Refer to the chart on page 42/43 to find the type and brand
name of the device you're programming.
Press and hold PRG until the indicator light turns on, then
release PRG.
Press AUX and the 1 on the NUMBER keypad at the same
time (for AUX +1).
Using the NUMBER keypad, enter the three-number code for
the device you've selected.
Press ENTER to save the code.
With the device turned on, point the remote at it and press
POWER. It should turn off.
Repeat the steps for AUX+2, and AUX+3.
7
Indicator Light