• Try unplugging your Entertainment Machine for a few minutes,
then plug it back in. (Don’t forget to reset the clock.)
• Check to see if the source equipment has been turned on.
• Make sure that the connections are secure on the back of your TV and on
the source equipment.
• Check to see if all the connections are secure.
• Look in the Audio mode menu to see if all the settings are correct.
• You might want to adjust the PIP picture settings under the PIP menu.
• Check that all the wires are connected properly.
• Look to see if the TV/VCR button on your VCR has the TV selected.
• Look to see if the TV/VCR button on your VCR has the TV selected.
Menu options can’t be
changed or selected.
No picture or sound
when any non-cable source
is selected.
Weak or no Stereo Sound
when using a stereo VCR.
The PIP inset is black or
lacks contrast when VIDEO 1
is the PIP source.
The PIP inset is “snow” when
the source is Antenna/Cable,
Video 1, or Video 2.
There is no picture in the
PIP inset when using VIDEO 1
for the PIP and Antenna/Cable
for the main picture.
If all else fails, try unplugging your entertainment machine for about 5 minutes, then plugging it back in.
(Don’t forget to reset the clock.) If that doesn’t work, call 1-847-391-8752, extension 5, between 8:30 am
and 4:30 pm Central Standard Time.
R E F E R E N C E M A I N T E N A N C E
P A G E 4 4
Troubleshooting cont’d
3374-O
Some quick
and easy
tips to fixing
problems
yourself.
