4
A100K11422
Flowire Converter Configuration Manual
1 Product Description
1.1 General Description
The Flowire Converter enables Ethernet to run on the same two wires as power, providing simpler
cabling and opening up for longer cable hauls. The Flowire converter is also capable of powering the
Ethernet devices (Vingtor-Stentofon IP intercom stations) attached to it via spare pairs.
1
Flowire/Power Ports
Ground Connection
Status Indicators
1
2
3
2
3
4
5
Password Reset Button
4
Ethernet Port
5
Figure 1 FCDC1 Flowire Converter
There are two models of the Flowire Converter:
Model
Description
FCDC1
24-48 VDC Flowire Converter with power-forwarding (PoE, type
2). Forwards 48V from the power supply to the spare pairs of the
Ethernet port (not true PoE).
FCDC2
Non-PoE 24-48 VDC Flowire Converter for use with central equipment
rack and Ex devices. Does not forward 48V to the spare pairs of the
Ethernet port.
Figure 2 FCDC1 and FCDC2
L
It is recommended to use FCDC1 only when you need to power the connected device
via the spare pairs of the Ethernet port. In all other situations, use the FCDC2.
