Zenitel RCS01, Product Manual, Page: 21 / 24

RCS01 - Product Manual
7 Safety and
Precautions
7.1 Environmental
Always ensure adequate ventilation is provided for
the equipment and do not obstruct ventilation
holes.
The temperature and humidity ranges shown in
the specifications for this product must not be
exceeded.
This equipment must not be installed in an area
that is subject to a corrosive atmosphere,
excessive moisture or may allow water or other
liquids to come into contact with the unit or its
external connections.
7.2 Electrical Safety
This product contains wiring that is
energised
to 230 V RMS AC
mains.
Always ensure that the equipment
is correctly earthed by connection
to an AC mains supply with a
protective earthing connection.
Ensure power supply cabling is
adequately rated for the unit’s
operating current and protected, in
case of short circuit, by a correctly
rated fuse or circuit breaker.
Always replace blown fuses with
the correct type and rating.
7.3 Unpacking and Handling
The equipment should be unpacked and
inspected immediately on receipt. If damage has
occurred please advise your carrier or supplier.
It is advisable to retain the original equipment
packing in the event that the equipment ever
needs returning for service.
Ensure that the name and address of the
Authorised Distributor from whom you purchased
the unit is recorded on the “
Service and Warranty ”
page of this manual for future reference.
Advice on packing the product for return can be
provided by Application Solutions (Safety and
Security) Ltd..
! !
!
!
!
!
Issue: 03 complete, approved
Page 21 of 24