RCS01 - Product Manual
3.3
Wall Mount Installation
Required Tools
•
2 x desk mounting brackets (supplied).
•
4 x M4 pozidriv countersunk screws for fixing the brackets to the unit (supplied).
Use only the M4 screws provided. Alternative screws must not exceed 8 mm.
•
1 x IEC connector for the power supply cable (supplied).
•
A pozidrive screwdriver No. 2.
•
A medium flat-bladed screwdriver.
•
Suitable fixings for the unit.
•
A screwdriver, nut spinner, or other appropriate tool to fix the above fixings.
Installing the Fixing Brackets
Fit the two fixing brackets to the rear of the unit using the screws provided.
VIEW OF CHARGING STATION REAR
FIXING HOLES
FIXING HOLES
BRACKET
M4
COUNTERSUNK
SCREWS
BRACKET
FITTED
BRACKET
FITTED
BRACKET
Use only the M4 screws provided.
Alternative screws must not exceed 8 mm.
!
!
Countersunk holes to be used for fixing the brackets.
L
Issue: 03 complete, approved
Page 12 of 24