Remove each sensor from the Client, trying
to keep the paste clear of the hair as best you
can. Be sure to clean the sensors of all paste
with a tissue or baby wipe.
Clean the Client’s ears and hair as best you
can with a tissue, then offer them a baby
wipe to remove any remaining paste. The
paste removes easily with water.
To close NeurOptimal
®
Tap the “x” at the
top right of the VAULT. To shut down your
system, tap the Windows icon on the lower
left of your screen and shut down from there.
NOTE:
It might seem challenging
at first, but soon you will be able to do a
hook up (on yourself or a Client) in less
than a couple of minutes. You can have
Clients doing Sessions with time for a
break in between, comfortably in hourly
slots. NeurOptimal
®
AutoNav feature
allows you to run multiple Clients
concurrently if you wish, with each Client
at their own NeurOptimal
®
station.
TIPS
on preserving the integrity of
your sensors:
Make sure you clean your sensors
gently yet thoroughly immediately after
you have finished each Session. We
recommend using baby wipes or
placing under running hot water
(be sure to thoroughly dry once clean).
Any lingering paste can cause corrosion
and will reduce the lifespan of your
sensors.
Do not soak in water.
When scooping paste put your
forefinger on the back of the cup for
support, preventing bending and
possible sensor damage.
Do not kink, braid or wind your sensor
wires tightly.
Damaged sensors should be replaced.
Do not attempt to use questionable
sensors.
1
2
3
4
5
4
PART
Unhooking your Client
1
2
3
21
