ZENEC ZE-NC5010, User Manual

Page: 51 / 84

51
ZE-NC5010
MUTE FUNCTION
■
Manually: Press the PWR/VOL rotary knob on the front panel to mute the audio output.
Press the knob again to deactivate the mute function.
■
Automatically: During a phone call, the audio output will be muted.
AUDIO CONTROL MENU
■
The audio control menu allows you to adjust your audio system to meet your requirements
and the acoustical characteristics of the vehicle. The menu item "SW" is only relevant, if
you have a subwoofer connected to the respective sub pre-out of the unit.
■
Press and hold the SMART DIAL rotary knob
to enter the audio control menu.
■
Touch the icon with the current playing mode
in the upper left corner of the screen to leave
the menu.
■
After 15 seconds of idling, the audio menu
returns to the current audio source.
NOTE:
■
Bass and treble settings are only adjustable in
"User"-mode.
VIDEO PLAYBACK DISABLED
■
The video playback on the display of the unit will be disabled when the car is in motion
and exceeds a speed of 3 km/h. For safety reasons use it exclusively during standstill with
the handbrake engaged.
■
The rear camera mode and the M-Zone remain unaffected.
SYSTEM RESET
■
If the unit does not work correctly, you should fi rst try to reset it by pressing the RESET-
Button on the bottom-right corner of the front panel. The last adjustments will always
be saved.