ZENEC ZE-NA150, Instruction Manual

Page: 86 / 156

86 86
SAFETY INFORMATION AND PRECAUTIONS
D
WARNING!
Please read and follow the following safety precautions.
Failure to follow the instructions below may increase your risk of collision and personal
injury.
O
The ”Please Drive Safely” screen is displayed each time when the NavMate software
is turned ON as a reminder to make use of the system’s navigational aids in a safe
manner.
O
Before using the NavMate software, read this entire manual. Make sure that you are
familiar with the system’s features and know how to operate the system. Proper use of
the NavMate software includes the following guidelines:
O The NavMate software is not a substitute for your personal judgment. The route
suggestions should never supersede any local traffic regulation or your personal
judgment and /or knowledge of safe driving practices. Prior to completing any maneuvers
suggested by your NavMate software (for example, a U-turn or a left turn), verify that
you can legally and safely complete the maneuver. Do not follow route suggestions if
they direct you to perform an unsafe or illegal maneuver, would place you in an unsafe
situation, or would route you into an area that you consider unsafe.
O
Glance at the screen only when necessary and safe to do so. Let the computer voice
guide you. If prolonged viewing is necessary, pull off the road to a safe location.
O Do not use the NavMate software to locate emergency services (such as police, fire
stations, hospitals, and clinics). The database may not include all emergency service
providers. Use your own best judgment and ask for directions in these situations.
O
If the vehicle is in motion, only a passenger should program the NavMate software. The
driver should not program the system unless the vehicle is parked in a safe location.
O
The NavMate software’s map database provides information on suggested routes
without regard to factors that may affect your driving experience or the time required
to arrive at your destination. For example, the system does not reflect road detours,
closures or construction, some road characteristics (e.g., road surface, slope or grade,
weight or height restrictions, etc.), temporary traffic congestion, weather conditions,
and similar factors.