ZENEC ZE-NA150, Instruction Manual

Page: 88 / 156

88 88
USING THE ZE-NA150 NAVIGATION SYSTEM
O
There are two ways to use the ZE-NA150 navigation system.
ABOUT PND AND PNR
PND Mode
O
Start the portable when it is not connected to the moniceiver through the DIN connection
cable, enter the system main menu, and now the ZE-NA150 is working in Portable
Navigation Display Mode (PND Mode for short).
O In PND mode, you can use all the functions on the portable, such as navigation, music
player and video player. For details, please refer to the chapter “Introduction of main
function”.
PNR Mode
O
Start the portable when it is connected to the moniceiver through the DIN connection
cable, then the moniceiver can identify the navigation function on the portable, and the
“navi” button/icon of the moniceiver is ready for use. Now, the ZE-NA150 is working in
Portable Navigation Ready Mode (PNR Mode for short).
GND (Black): Connect the black wire to GND of your car.
ACC (Red): Connect the red wire to a swit12V source.
B+ (Yellow): Connect the yellow wire to a per12V source.
DIN connection cable: Connection cable to connect the docking station to the moniceiver.
External GPS receiver: Connectivity to connect an external GPS receiver.
DIN connection cable
External
GPS receiver
DC connection box
GND (Black)
ACC (Red)
B+ (Yellow)