106
DEUTSCH
GERMAN
107
ALLGEMEINE BEDIENUNG
gerät ein- und ausschalten
■
um das gerät einzuschalten, drücken Sie die [SRC]-Taste auf dem bedienteil oder die
[POwER]-Taste auf der Fernbedienung. nach dem Einschalten geht das gerät auf den
letzten Status zurück.
■
um das gerät auszuschalten, halten Sie die [SRC]-Taste auf dem bedienteil etwas
länger gedrückt oder drücken Sie die [POwER]-Taste auf der Fernbedienung.
navigation
■
betätigen Sie die [nAV]-Taste auf dem bedienteil, um in den navigations-modus zu
gelangen. Die aktuelle Audiowiedergabe wird fortgesetzt, es sei denn, eine navi-
gationsansage kommt, wenn die navigationsquelle aktiv ist.
lautstärKeeinstellung
■
Drehen Sie den lautstärkedrehknopf auf dem bedienteil oder drücken Sie die [VOl]-
Taste auf der Fernbedienung.
■
Der Einstellbereich der lautstärke reicht von 0 bis 40.
■
um die Stummschaltung ein- bzw. auszuschalten, drücken Sie die [VOl]-Taste oder die
[muTE]-Taste auf der Fernbedienung.
Bitte Beachten
■
Das Einstellen der lautstärke schaltet die Stummschaltung aus.
■
Das muTE-icon blinkt auf dem TFT-bildschirm während der Stummschaltung.
hauptmenÜ
■
um das hAuPTmEnÜ zu öffnen, drücken Sie die [SRC]-Taste auf dem bedienteil
oder auf der Fernbedienung oder berühren Sie die oberste linke Ecke des bildschirms.
wiederholen Sie diese Operation, um zur ursprünglichen Quelle zurückzugehen.
ausWahl einer WiedergaBeQuelle
■
um das hAuPTmEnÜ zu öffnen, wählen Sie die Quelle, die Sie wünschen im menü aus.
wählen Sie mit dem Cursor die gewünschte Quelle und bestätigen Sie diese mit der
Fernbedienung.
Bitte Beachten
■
wenn die wiedergabequelle nicht betriebsbereit ist, kann diese nicht ausgewählt werden.
ALLGEMEINE BEDIENUNG
sYstemZeit anZeigen
■
bitte halten Sie die [DiSP]-Taste länger gedrückt, um zwischen der Systemzeit und der
Anzeige der wiedergabequelle zu wechseln. Diese Funktion ist nur beim ausgefahrenen
monitor möglich.
Bedienung des tft-Bildschirms
Bildschirm öffnen/schließen
■
Drücken Sie die [OPEn/ClOSE]-Taste, um den bildschirm herauszufahren.
■
Drücken Sie die Taste erneut, um den bildschirm wieder einzufahren.
neigungswinkel des tft-Bildschirms ändern
■
Drücken Sie die [TilT]-Tasten auf dem bedienteil oder auf der Fernbedienung, um den
neigungswinkel des bildschirms schrittweise einzustellen.
■
Durch längeres Drücken der [TilT]-Tasten auf dem bedienteil oder auf der Fernbedienung
können Sie den neigungswinkel des bildschirms stufenlos einstellen.
Bildformat ändern
■
Drücken Sie die [wiDE]-Taste auf dem bedienteil oder auf der Fernbedienung, um das
Standby des monitors zu aktivieren/deaktivieren.
Bildeinstellung
1. Drücken Sie die [PiC]-Taste auf der Fernbedienung, um in den bildeinstellungs-modus
zu gelangen.
2. betätigen Sie die [
]/[
]-Tasten auf der Fernbedienung, um ein Feld auszuwählen.
3. betätigen Sie die [
]/[
]-Tasten auf der Fernbedienung, um den Einstellungswert zu
ändern.
4. Drücken Sie die [PiC]-Taste auf der Fernbedienung, um den bildeinstellungs-modus zu
verlassen.
werden nach einigen Sekunden keine Veränderungen vorgenommen, wird der modus
automatisch verlassen.
gerät zurücksetzen
■
wenn das gerät nicht richtig funktioniert oder blockiert, drücken Sie die [RESET]-Taste
auf dem bedienteil, um das gerät zurückzusetzen.