60 Rev.B
61 Rev.B
TIME ALIGNMENT
Function
Icon
Operation
Unit
Selection of desired unit
ms = time
cm = distance
Speaker
Tap to select the desired speaker
(FL / FR / RL / RR / SW)
Delay
ms = 0.0 < > 20 in approx. 0.1 ms steps
cm = 0 < > 680 in approx. 3 cm steps
In this menu you can set the time delay correction for the loudspeakers in your vehicle.
The distance between the ears and the speaker system installed in the vehicle varies considerably
due to the given arrangement of the factory mounting location. This menu gives you the option to
delay the audio signal at each of the speakers so that you have a ”center stage” effect.
Set your central listening position. Measure the distance from this position to each speaker.
Now you need to add the corresponding delay - depending on the speaker with highest distance - to
move the speakers to same distance from selected position. Enter these distance to let all speakers
have the same distance. You can fine tune values by “ear” after the distances from listening position
to each speaker have been entered, simply by adjusting the left front speaker delay until center stage
position is reached.
TFT DISPLAY CONFIGURATION
In the TFT Setup menu you can make screen settings that control the day/night brightness of the
TFT LCD display screen.
Function
Icon
Operation
TFT
configuration
Tap to adjust display configuration
TS-Brightness
Day
Day adj range
0 ~ 20
TS-Brightness
Night
Night adj range
0 ~ 20
TS-Auto
Standby
Tap to enable or disable TFT Auto Standby function and Auto
Screen shutdown. TFT goes into standby after selected time.
NOTE
Using the DISP button you can set the display brightness to three levels
(
100% → 50% → 0%
).
