40 Rev.B
41 Rev.B
PAIRING
Via ZENEC system
Function
Icon
Operation
Scan
(Search)
Tap to the SCAN icon to initiate a search for BT devices. Re-tap
to stop the search and show the device-list. Select from the list
the desired mobile device that you want to synchronize with the
ZENEC system. Once device is selected, follow the instructions.
Code
Standard Code*: 0000
Via the mobile device
Function
Icon
Operation
Search
Make sure that the ZENEC system is in Device Manager view
otherwise the ZENEC system will not be visible to others. Follow
the instructions of the device manufacturer on pairing.
Auto Connect
Once a mobile device has been connected with the ZENEC system, it will be automatically paired
when the ZENEC system is started. On being briefly disconnected the ZENEC system will attempt to
establish a new connection.
NOTE
On pairing for the first time, be sure to permanently enable the connection confirmation on your
mobile device, otherwise malfunctions may occur during the Auto Connect process.
NOTE
*For mobile devices that do not support the SSP standard
To connect a smartphone to the Zenec device via Bluetooth, first step is to successfully complete the
pairing process.
Icon
Function
Mobile phone currently connected
Battery capacity of the mobile phone currently connected
Signal strength of the current mobile network
BLUETOOTH STATUS BAR
BLUETOOTH SETUP
On the Bluetooth setup page you can adjust settings for Bluetooth operation. Press the appropriate
button / field to change any of the listed settings.
Function
Icon
Operation
Bluetooth
Settings
Tap to change settings for BT operation
Auto
Connection
ON / OFF
Contacts
Order
1. by first name of contact
2. by surname of contact
Microphone
Gain
Tap to set the Mic. gain from 0 to 12
Bluetooth
Adress
BT
Unique ZENEC BT device address.
Auto
Answer
ON / OFF
ON = Automatic call acceptance (after 3 ring tones) activated
OFF = Automatic call acceptance deactivated
Auto Load
Phonebook
ON / OFF