3
ATTENTION
● The ZENEC system should be installed by an authorised retailer. Specific knowledge and tools are
required for installation. Incorrect installation can damage the vehicle and the ZENEC system.
● Fault-free operation can only be guaranteed if you use the equipment supplied, or the optional ZENEC
original accessories. The ZENEC system and original accessories must never be modified or altered in
any way.
Incorrect handling can damage the vehicle and the ZENEC system.
NOTE
● The ZENEC Z-E6150 is equipped with an integrated DAB+ receiver. To use it, you need a suitable DAB
antenna (not supplied), which must be connected to the ZENEC system.
● If the target vehicle is fitted with an original DAB antenna, it can still be used in conjunction with the
ZENEC system.
● ZENEC system software updates are installed using a USB data stick. You must therefore ensure
that the USB connection on the ZENEC system remains accessible during installation (installation of
USB extension).
● If you have any queries or problems with the ZENEC system, please contact the retailer where you
purchased it.
SUPPLIED ITEMS
No. Item
Quantity
1 ZENEC system
1
2 Main power cable for Toyota
1
3 20-pin cable (AUX-IN / SWC)
1
4 28-pin cable (AUX-IN / SWC /Rev.)
1
5 24-pin connection cable (4.2,Cam, MZone, Mic)
1
No. Item
Quantity
6 FM ISO antenna interface for Toyota
1
7 1m USB extension cable
1
8 Cable for handbrake contact
1
9 GPS antenna with cable and Fakra plug
1
10 Main unit manual
1
TOOLS REQUIRED
● Ratchet with 10mm hex nut
● Cross-head screwdriver (Phillips PH2)
● Plastic lever tool
● Insulating tape
OPTIONAL INSTALLATION ACCESSORIES
● DAB antenna with SMB plug (e.g. Z-EACC-DAB1 or Z-EACC-DAB2)
● External microphone (N-ZENC-MIC)