Dimensions
Mounting options
Field mount
Fixing centres
195 mm
Dimensions
206 / 42 / 30 mm
Installation
Remove the product from the box and inspect it for any damage. If you
believe the product to be damaged or otherwise unsound,
do not
install
the product. Please pack it back into its box and return it to the place of
purchase for replacement.
If the product is satisfactory, proceed with the installation:
1
Ensure safety warnings are adhered to
.
2
Remove the end-covers by unscrewing the four fasteners to access
the mounting centres and terminals per
fig 2
.
3
Mount the application controller using the allocated mounting
centres, as per the above dimensions. Avoid mounting on metal
surfaces, as this will prevent the radio communication.
4
Wire as per
fig 4
overleaf.
5
Reattach end-covers, ensuring adequate strain relief
Specifications
Supply voltage
220 - 240 V ~ 50 Hz
Control system
IEC62386-104 over Thread
Radio support
IEEE 802.15.4
Frequency band
2.4 GHz
Max radio tx power
+8 dBm
Ethernet
10/100 TCP/IP Ethernet
Wiring
1 - 4 mm
2
Strip 6 - 7 mm
Operating temperature
0 to 55°C
Material
PC
Classification
Class II
Ingress protection
IP20
Product range
Order code
Description
zc-iot-fc
Wireless field mounted application controller
Safety information
■
This product must only be installed by a licensed electrician.
■
Before commencing installation turn off and isolate the
electrical supply.
■
There are no user serviceable parts, attempting to service any
part of the product will void the warranty
■
DALI is not SELV and as such should be treated as LV.
■
As the installer, it is your responsibility to ensure you comply
to all relevant building and safety codes. Refer to application
standards for the relevant rules.
■
When the installation is complete, leave this manual with the
building’s owner for future reference.
Wireless application controller
zc-iot-fc
206
42
30
IEC 62386-104
over Thread
zc-iot-bridge
IEC 62386-103
D4i driver
Wireless sensor
IEC 62386-303
IEC 62386-304
To
zencontrol
Cloud
Wireless s
witch
IEC 62386-301
Wireless driver
IEC 62386-207
zc-iot-fc
IEC 62386-103
Wireless DT8 driver
IEC 62386-209
IEC 62386-101
Wireless system overview
Cover
Fastener
RJ45
2
To ensure adequate radio communication
DO NOT install device in a metal enclosure
