Zelmer ZIS2415 ACTIVE, User Manual

Page: 12 / 76

12
PL EN
an Official Technical support service. In order to prevent any risk of danger, do not open the device. Only
qualified technical personnel from the brand´s Official Technical support service may carry out repairs or
procedures on the device.
Proceed according to the conservation and cleaning section of this manual for cleaning.
B&B TRENDS S.L. disclaims all liability for damages that may occur to people, animals or objects, for
the non-observance of these warnings.
Before the first use
Before using the Steam Station, please ensure you read the user manual and understand all parts and
features of the Steam Station. Be sure to remove any packaging material and labels before using for the
first time.
In the first use they can break off odors or fumes that sent quickly. Do not spray for the first time on
clothes and there may be traces of dirt on the soleplate.
Water to be used
The device is designed for use with tap water. If the water in your area is hard or semi-hard use mix
tap water with distilled or demineralized water purchased in stores, in the ratio 2:1 and 1:1 respectively
(distilled water: tap water). Check with your water supplier to determine the type of water in your area.
Never use 100% distilled or demineralized, rain water, softened water, scented water, water from other
appliances such as refrigerators, air conditioners, dryers or other types of home water preparation water.
Filling the Water Tank
Remove the water tank from the station and fill it through the water inlet cover. Do NOT fill over the MAX
level indicator.
Make sure when placing it back to the station that it fits correctly.
OPERATING INSTRUCTIONS
NB: If it is the first time you have steam-ironed or if the product has not been used for some time,
turn the temperature control to a steam ironing position and press the steam button continuously
until steam comes out. This process can take a few minutes.
Place the Steam Station on a firm level table, bench or ironing board.
Plug the unit into a power outlet and switch on at the power point.
Adjust the temperature dial in terms of choose the kind of fabrics that you want to iron.
Note: If you want to use the steam ironing, we suggest you to adjust the temperature dial on MAX.
When the iron operating light indicator goes out the device will be ready for use.
Note: During the whole operating time, the iron operating light indicator will go on and off in erratic
intervals, this is normal.
To make the steam jet come out, select the steam position with the steam selector and press the steam
trigger, and if you want to stop the steam release the steam trigger, in a few seconds steam will stop.
Select the steam setting by pressing and holding the steam button. The steam setting can be switched
off at any time by releasing the steam button. Push the steam locker with continues steamer without
pressing the steam button.
Ironing Tips
Start with the fabrics to be ironed at a low temperature and finish with those that need higher
temperatures.
For mixed fibre fabric, set the ironing temperature to a lower setting.
For woollen garments, press the steam trigger repeatedly over the garment without physically touching it
with the iron.
For thicker fabrics, raise the iron temperature at MAX position.