Zelmer ZIR3200 Healthy, User Manual

Page: 14 / 93

“SmartCare” temperature programme. If you want to change to another
programme, please press the
SET button.
Once the selected temperature is reached, the indicator light will turn off, indicating you may start
ironing.
Water tank filling
Unplug the iron before filling the water tank.
The device is designed for use with tap water. If the water in your area is hard or semi-hard use mix
tap water with distilled or demineralized water purchased in stores, in the ratio 2:1 and 1:1 respectively
(distilled water: tap water). Check with your water supplier to determine the type of water in your area.
Never use 100% distilled or demineralized, rainwater, softened water, scented water, water from other
appliances such as refrigerators, air conditioners, dryers or other types of home water preparation water.
1. Open the cover for filling.
2. Slowly pour water through the water inlet.
3. Do not fill higher than mark on the water tank, in order to avoid spilling out of water.
4. Close the cover for filling.
The water tank should be emptied after each use.
Spraying
As long as there is enough water in the water tank, you may use the spray button at any temperature
setting during steam or dry ironing.
Steam ironing
1.
Set the temperature control dial to the desired position in accordance with the manufacturer’s
label.
2. The LED of the selected temperature will start blinking until the temperature is reached. Then the LED
will become fixed and you will hear an acoustic sound.
CAUTION: Avoid coming in contact with ejected steam.
This iron generates steam by means of a built-in motor, and has two steam production modes. The mode
can be changed by double-clicking the motor activation trigger.
Autosteam mode
The “auto” indicator lamp is on.
The iron will automatically set the appropriate steam amount that is suitable for the selected ironing
programme. The steam will be produced continuously.
Manual steam mode
The “auto” indicator lamp is off.
Steam production can be controlled manually for steam ironing only when necessary.
For ironing with steam, press the motor activation trigger.
For ironing without steam (dry ironing), do not press the motor activation trigger
.
Dry ironing
The steam iron can be used on the dry setting with or without water in the water tank, it is best to avoid
having the water tank full while dry ironing.
Set the “MANUAL STEAM” mode. Do not pres
s the motor activation trigger.
Select the setting on the temperature control dial best suited for the fabric to be ironed.
CAUTION: If the steam iron has been used for a long time, it is hot and there is no water. Do not refill it
with water until the steam iron cools down.
Shot of steam
The shot of steam feature provides additional steam for removing stubborn wrinkles.
14
EN