![background image](http://html1.mh-extra.com/html/zelmer/zir0500/zir0500_user-manual_3361714011.webp)
11
PL
EN
HOW TO USE
Always check whether a label with ironing instructions is attached to an article to be ironed. Follow these
instructions in all cases.
Turn the temperature control dial round to set the appropriate temperature indicated in ironing
instructions or in fabric label
.
Marking
Material, for example
. (1 dot)
Acetate, elastane, polyamide, polypropylene
. . (2 dots)
Cupro, polyester, silk, triacetate, viscose, wool
… (3 dots) / MAX
Cotton, linen
Insert the main plug into the wall socket. The indicator light will turn on. Once the selected temperature is
reached, the light will turn off, indicating you may start ironing
.
Water tank filling
Unplug the iron before filling the water tank.
The device is designed for use with tap water. If the water in your area is hard or semi-hard use mix
tap water with distilled or demineralized water purchased in stores, in the ratio 2:1 and 1:1 respectively
(distilled water: tap water). Check with your water supplier to determine the type of water in your area.
Never use 100% distilled or demineralized, rain water, softened water, scented water, water from other
appliances such as refrigerators, air conditioners, dryers or other types of home water preparation water.
Open the cover for filling.
Slowly pour water through the water inlet.
Do not fill higher than mark on the water tank, in order to avoid spilling out of water.
The water tank should be emptied after each use
.
Steam ironing
Set the temperature control dial to the desired position in accordance with the manufacturer’s label. The
indicator light will turn on until the temperature is reached. Then the indicator light will turn off.
Set the variable steam control to the desired position.
CAUTION:
Avoid coming in contact with ejected steam
.
Dry ironing
The steam iron can be used on the dry setting with or without water in the water tank, it is best to avoid
having the water tank full while dry ironing.
Turn the variable steam control to the minimum position.
Select the setting on the temperature control dial best suited for the fabric to be ironed.
CAUTION:
If the steam iron has been used for a long time, it is hot and there is no water. Do not refill it
with water until the steam iron cools down
.
Shot of steam
The shot of steam feature provides additional steam for removing stubborn wrinkles.
Turn off the variable steam control to the min position
Press the powerful steam button to release the burst of steam.
Summary of Contents for ZIR0500
