Zelmer zhb1600, User Manual

Page: 72 / 72

78
ZHB1600-001_v02
Recom-
mended
product
weight
Maxi -
mum
number
of
c�cles
350 g 500 g 3
300 g 300 g 3
350 g 500 g 3
350 g 500 g 3
250 g 500 g (6-15) x 4 s 5
30 g 40 s
3
200 g + 3 g 5 s
Disc holder with inserts
(slicing, shredding and grating inserts)
1
Place the food processor bowl on a hard, flat and dry
surface.
2 Install the desired insert ( e.g. 23a) in the disc holder
(23a) To avoid injury, install and remove inserts holding the
disc holder (23) with both hands and thumbs.
3 Place disc in the bowl and onto the protrusion in the
centre of the bowl.
4 Place gear unit onto the bowl making sure that tabs are
aligned with the grooves in the bowl and turn clockwise all
the way until resistance.
5 Attach motor unit to the gear unit, and lock.
6
Plug in the appliance.
7 Place food products in the tube of the gear unit.
8
Gently place the pusher into the tube of the gear unit as
not to push the product before operating the motor unit (only
push the product further when the motor unit operates).
9 Set the desired speed using the speed control dial.
10 Press
/
to turn on the appliance.
When you have finished your work
1 Release the buttons
/
2 Unplug power cord from wall outlet.
3 Unlock using the release buttons and detach the motor
unit (after the appliance comes to a full stop).
I
J
4 Remove the pusher from gear unit tube.
5 Unlock and remove the gear unit.
6 Remove disc holder with insert.
7 Remove the insert.
8
Empty the bowl.
Tips on operating the appliance
Shredding and grating inserts
●
Place the food product to be processed in the tube, place
pusher in the tube (but do not push) and turn on the
motor unit. Gently push the pusher when the appliance
operates.
●
Stop the appliance when the bowl is filled up to 1250 ml,
empty the bowl and collect shredded/grated food product
from bowl walls.
Slicing insert
●
It is recommended to put products into the tube vertically
so that the entire cross-section of the tube is filled.
●
Place the food product to be processed in the tube, place
pusher in the tube (but do not push) and turn on the
motor unit. Gently push the pusher when the appliance
operates.
●
Stop the appliance when the bowl is filled up to 1250 ml,
empty the bowl and collect residue food product from the
disc.