![background image](http://html1.mh-extra.com/html/zelmer/zfd2250w/zfd2250w_user-manual_3413459032.webp)
32
For even drying result, it is recommended to
change the position of sieves from time to time
during operation. Note that drying products
with high water content, such as plums, grapes
or wet mushrooms takes much more time.
5
To change the power level, press the power adjust button
. The indicator light
2d
will come on.
The appliance has two power settings (250 W
and 500 W). Press the
button to switch
between power level I and II.
6
Press
to switch off the appliance.
To completely switch off the appliance, pull the
plug from the wall socket.
Overheat protection
The dryer is equipped with a thermal protection system:
Circuit breaker
– in case of excessive temperature increase,
the heating element will disengage automatically and the fan
will remain on. The heating element comes on again once
cooled down to normal service temperature.
Troubleshooting
The fan or the heating element does not work:
●
Return the appliance to a service centre.
Cleaning and maintenance
●
Wash the drying trays and the lid in warm soapy water.
They are also suitable for dishwasher at max. 60°C.
●
Clean the heating and ventilation unit
1
with a damp
cloth and wipe dry.
●
Plastic parts of the appliance may change colour during
long-term use. It is normal and should not be considered
a defect.
●
Dry all parts thoroughly after cleaning.
Disposal
Dispose of packaging in an environmentally-
friendly manner. This appliance is labelled
in accordance with European Directive
2012/19/EU concerning used electrical and
electronic appliances (waste electrical and
electronic equipment – WEEE). The guideline
determines the framework for the return and recycling
of used appliances as applicable throughout the EU. Please
ask your specialist retailer about current disposal facilities.
The manufacturer does not accept any liability for any damages
resulting from unintended use or improper handling.
The manufacturer importer reserves his rights to modify the product
any time in order to adjust it to law regulations, norms, directives,
or due to construction, trade, aesthetic or other reasons, without
notifying in advance.
Technical data and description
The technical data are given on the nameplate.
Nominal capacity: 11 l.
Noise level (L
WA
): 66 dB/A.
Construction of the appliance
1
Heat-and-ventilation unit
2
Control panel
a
On/Off switch
b
Power level switch
c
Indicator light – power level I (250 W)
d
Indicator light – power level II (500 W)
3
Drying trays (4 pcs.)
The drying trays may be adjusted between two positions:
a
Folded position – only for storing the appliance
(saving space)
b
Extended position – for using the appliance (a large
gap is visible between the trays)
4
Lid
5
Cord storage compartment
6
Power cord
Use and operation
Before using the appliance for the first time,
disassemble it and wash all parts that come into
contact with the processed food products (see
„Cleaning and Maintenance”). Reassemble once dry.
1
Place the appliance on hard, dry and level surface near
a wall socket.
2
Distribute the food on drying trays and place the trays in
the extended position
3b
on the heat and ventilation unit
1
Apply the lid
4
. To extend the trays, rotate them 90 degrees
relative to each other so that a large gap is visible between them.
Distribute food products loosely on trays,
making sure not to block the airflow through the
trays. Choose the number of trays according to
the amount of food you intend to dry.
Dehydration is achieved by the circulation
of hot air through the trays. The drying time
depends on the content of water in products
and their fragmentation. For example, when
drying apples, it is recommended to use slices
not thicker than 5 mm.
3
Insert the plug into a wall outlet.
4
Switch on the appliance by pressing the On/Off button
. The appliance will start operating on power I setting. The
indicator light
2c
will come on.
Never use the appliance with trays in the folded
position!
A
B