Zelmer BS1800, User Manual

Page: 36 / 40

36
BS1800-001_v01
Control panel
DISPLAY SYMBOLS
– gender and body type
– body water
– muscle mass
– bone mass
– body fat
– age
FUNCTION BUTTONS
SET – set / confirm
▲ – increase / select
▼ – decrease / select
Use and functions
HOW TO USE
1 Remove the scales from the box.
2 Insert batteries into the battery compartment (see
“REPLACING BATTERIES”).
3
Switch on the scales by stepping on weighing platform.
4 Press the weighing unit button repeatedly until your
required weighing unit shows on the display. The weighing
unit button is located on the underside of the appliance.
5
Enter personal data of the user (see „BIA FEATURE”).
6 To start your measurement, wait until the display shows
. Step on the weighing platform with feet on the metal
plates.
7a
If the reading has stabilised but the user has not been
identified, the result will be displayed for 5 seconds and the
appliance will switch off automatically (weight measurement
function).
The user will not be identified if feet are isolated
from the sensors on the weighing platform
(e.g. by shoes).
7b The measurement will start once the reading has
stabilised, the persona data of the user has been entered
and the user has been identified.
In addition to displaying the body weight, the device provides
information on the percentage of bone, muscle, water and
fat in the body.
This information will appear on the display
for about 20 seconds and then the device will
switch off automatically.
Compare your results with the tables below (see Reference
tables ).
REPLACING BATTERIES
The battery compartment is located on the underside of the
appliance.
1
To replace the batteries, pull out the compartment cover
and remove old batteries.
2
Insert 4 new AAA 1.5 V batteries.
Make sure to insert the batteries the right way
round.
Check the inside of the compartment for correct
polarity description.
3
Replace the battery compartment cover.