Model: SD1110
Rechargeable
Portion Control Scale
11 pounds/5 kilograms/176 ounces
by pounds:ounces, ounces, fractional ounces and grams
Features
• Submersible
• Programmable
• Tare function
• Backlit display
• Field calibration
• Low/high limit alerts
• Stainless steel housing
• Removable stainless steel platform
• Rechargeable battery
• Power adapter
• Stability indication
• Selectable units
• Overload indication
• Battery status indication
• On/off button
• Auto-off after 2 minutes
Note:
In the following instructions, names of the control
buttons are shown in CAPS. Function information that
appears on the display is shown in
BOLD CAPS
.
Charging the Battery
The
LOW BATTERY
icon ( ) appears on the display
when battery status is low and needs to be charged.
The battery is built-in and does not need to be
replaced.
1. Insert the adapter plug into the jack on the back
of the scale. Allow the scale to charge for 5 hours.
The scale will then operate continuously for
approximately 14 hours
Operating Instructions
Place the scale gently on a hard and flat surface and
make sure it is steady before use to obtain accurate
measurements.
A. On/Off
1. Press the POWER button ( ) to turn on. The display
flashes all segments and then returns to zero.
2. The
STABILITY icon ( )
appears in the lower left
corner of the display when the weight is stable.
3. Press the POWER button ( ) to turn off.
B. Auto Off
The scale automatically turns off after 2 minutes
of inactivity.
C. Backlit Display
Press and hold the UNIT button for 3 seconds to
turn the backlit display on and off.
D. Unit Selection
1. Press the UNIT button to select the desired unit.
The display cycles through
g
,
lb
:
oz
,
lb
:/
oz
,
lb
,
oz
,
and /
oz
,
2. Press the SET button to confirm and return to
weighing mode.
