Zelmer 481.4, User Manual

Page: 59 / 60

65
481-018_v01
The manufacturer does not accept any liability for any damages
resulting from unintended use or inappropriate handling.
The manufacturer reserves his rights for modifying the product any
time in order to adjust it to law regulations, norms, directives, or due
to construction, trade aesthetic or other reasons, without notifying it
in advance.
together with drive inserting the projections in orifices placed
in the container, and turn the lid (in clockwise direction) until
it is definitely blocked.
9
Connect the plug into the mains supply outlet.
10 Start-up the appliance and engage the appropriate gear.
After operation, switch off the appliance and unplug it
●
from the socket.
Disassembling the ice crusher, proceeds reverse to its
●
assembling.
The ice crusher blades are very sharp. Be very
careful during assembling, disassembling or
during cleaning.
Never exceed the maximum level of the ice
crusher input.
Never disassemble the lid from the container
before the disc stops rotating.
Operational tips
Maximum level of input of the ice crusher container
●
corresponds with the capacity of 450 ml.
Shake the appliance in case the products are clogged
●
over the disc.
In case the products get stuck to the inner wall of the
●
mini food processor container hindering or blocking
ejection of grinded product out of the upper container of
the ice crusher:
Switch off the appliance.
–
Remove the drive with the lid and container of ice
–
or – other products crusher.
Remove the products out of the mini food processor
–
walls.
Re-assemble the appliance - as defined above and
–
continue the operation.
Possible usage of the appliance
You can use products (i.e. fruit) grinded with the ice crusher
to prepare iceŁcream, yoghurts, desserts.
Recommended granulation level for given product
Product*
Recommended
gear**
Granulation
level
5 I-II
5 I
* The maximum level of input to the ice crusher container corresponds
with the capacity of 450 ml.
** Do not use the ice crusher longer than 2 min.
After operation
Switch the mixer off and unplug it.
●
Depending on assembled equipment:
1 Push the whisks or mixers out with a pushing button.
2 Disassemble the liquidizing disc from the whisk.
Disassemble the mixing adapter or mixing cup in reverse
●
way to assembling it.
3 Deflect the stand head with the motor part back. Turn
the clamp knob in counter clockwise direction as much as
possible and put the motor out of the head fasteners.
Wind the cord onto the motor.
●
Cleaning and maintenance
Remember to unplug before clearing and maintenance.
Clean the whisks and mixers with warm water with
●
cleaning agents.
Clean the mixing adapter and mixing cup by mixing
●
clean, warm water (after plugging the mixer to mains
supply).
Clean the cogged rim of rotational bowl with dishes
●
cleaning brush.
Do not wash the mixing adapter or the mixing cup in
●
dishwasher.
Turn the bowl upside down after cleaning and pour out
●
the water, which could remain under the cogged rim.
Before cleaning the steel bowl (type 481.64MM only)
●
disassemble the toothed wheel rim proceeding in reverse
to the assembly instruction ( Fig.
H
).
Dry the mixer equipment after cleaning and store in dry
●
place.
Clean the motor or stand casing with dump cloth and
●
then dry it.
Ecology – environment protection
Each user can protect the natural environment. It is neither
difficult nor expensive. In order to do it: Put the cardboard
packing into recycling paper container, Put the polyethylene
(PE) bags into container for plastic.
It is not allowed to dispose worn out
batteries to domestic waste disposal.
You should bring them to waste batteries
collection point or to the outlet.
When worn out, dispose the appliance to
particular disposal centre, because of the
dangerous elements of this appliance, which
can be hazardous for natural environment.
Please do not dispose into domestic waste disposal!!!
M
H
2
O