Zelmer 481.4, User Manual

Page: 54 / 60

60
481-018_v01
Technical data
Technical parameters are quoted at product nameplate.
Permitted motor operation time:
with mixers, whisks 10 min.
–
with mixing adapter or mixing cup 3 min.
–
with the mini food processor 2 min.
–
with the ice crusher 2 min.
–
Interval time before next operation (min.) 20 min.
Noise caused by the device (L
WA
):
with mixers, whisks, mixing adapter,
–
on the stand 80 dB/A
with mixing cup 84 dB/A
–
with the mini food processor 87 dB/A
–
with the ice crusher 84 dB/A
–
The mixers are produced in II insulation class, they don’t
need grounding.
ZELMER mixers meet current norms requirements.
The devices meet the requirements of the directives:
Low Voltage Device (LVD) – 2006/95/EC.
–
Electromagnetic compatibility (EMC) – 2004/108/EC.
–
The product is marked with CE on the name plate.
Appliance elements
1 Mixer motor
2 Pusher button
3 Switch lever
4 Turbo button
5 Whisks or mixers sockets
6 Mixing adapter hole
7 Handle insert
8 Mixers: left / right with toothed bar
9 Whisks: left / right with toothed bar
10 Liquidising dics
11 Mixing attachment
12 Cup
13 Mixing cup
14 Doser
15 Lid
16 Knife cup
17 Stand (with scales type 481.67 or without scales – other
models)
18 Head
19 Grip knob
20 Fastening button
21 Blockade control (type 481.67)
22 Rotating bowl
23 Steel rotating bowl
24 Toothed wheel rim for steel rotating bowl
A
25 Scraper blade
26 Blade
27 Display and scales keypad
28 Display
29 ON/OFF – the button to switch the scales off and on
30 Tarring knob TARE
31 Unit change button UNIT
32
Food processor lid with gearbox
33
Ice crusher container
34
Limiting ring
35
Double-sided disc of ice crusher for first level granulation
“I” (smaller size
A
) and second level granulation “II”
(bigger sizey
B
)
36
Mini food processor blade
37
Cover
38
Spindle
39
Mini food processor container
40
Mini food processor base
ZELMER mixers types
basic mixer equipment
additional equipment, which you can buy in shops
Device description
The mixer has 5 speed positions. The lever is used to set
●
up the particular rotation speed according to the numbers:
0, 1, 2, 3, 4 , and 5 on pusher button, which helps to remove
(push out) the mixers or whisks from the mixer motor part.
Additionally, the drive has
●
„turbo” button which helps to
get the maximum rotation speed immediately, regardless
the speed set with the lever. Such buttons are placed
both on the right and left sides of the casing intended for
the convenience of both left and right-handed users. The
„turbo” button is automatically blocked in „0” position.
There are 2 sockets (holes), for whisks or mixers
●
assembling, placed on the bottom of the motor part.
The insert handle, placed on the top of the motor part, is
●
made of the material increasing the comfort of holding the
mixer motor part - SOFTTOUCH.
There is a hole for mixing adapter or mixing cup assembling
●
at the back of motor casing. The hole is covered with
a mobile cover.
Mixer start-up and position setting
(rotation speed)
1 Place the ON/OFF switch in the “0” position - the
leftmost position. Install the selected tool.
Plug in the appliance.
●
Switch on the appliance by sliding the switch to the right.
●
2 If you want to increase the rotation shift the lever in
position „5” direction, choose the desired rotation speed.
B
C