Zelmer 477, User Manual

Page: 63 / 66

65
Dear Customer!
Please, read these instructions carefully. Special attention
should be paid to the information concerning safety in order
to avoid accidents and damages of the appliance. It is
recommended to keep this manual for further use.
Characteristics of the juice extractor
The juice extractor is an electrical appliance for fast fruit and
vegetable juice centrifuging with automatic separation of
pulp. The raw material is first pulped and next the juice is
centrifuged from the pulp. A simple and easy operation of the
appliance enhance its utility advantages. An electronic speed
stabilizer ensures a constant rotation speed irrespectively of
loading, which guarantees obtaining of juice even consistency.
The juice extractor is equipped with 2 centrifuging speeds
(for hard and soft fruit) which were chosen to obtain the
optimal quality parameters for squeezed juices. Keeping the
maximal content of fruit pulp and fibre containing vitamins,
pectin, enzymes and minerals in the juice results in its lower
clarity. This is an intended effect since the Producer of the
juice extractor decided that it is more important to keep the
highest possible nutritious, health and dietetic values of the
obtained fruit than its clarity. The juice extractor is additionally
equipped with filter self-cleaning function. After pressing the
turbo button, the engine works for about 3 seconds with high
rotation. High rotation helps to clean the filter in the event of
vibrations resulting from excessive pulp accumulation. The
turbo function may be used in 10-second intervals only. The
juice extractor may work for 15 minutes without any break.
The quantity of juice obtained, e.g. from 1 kg of a raw material
depends on its freshness as well as on filter cleanliness and
the state of the pulping blade. The parts in contact with the
processed raw materials are made of materials permitted for
contact with food.
Safety operation instructions
Do not disconnect the plug from the socket by pulling
●
a cord.
Before starting the appliance, uncoil appropriate amount
●
of power supplying cord.
Place the motor body near a socket on a flat, stable surface
●
so that the vent holes of the appliance are not covered.
The appliance must be plugged only to an alternating
●
current 230 V grounded socket.
Do not operate the appliance if the power supplying cord
●
is damaged or the casing is visibly damaged.
If the non-detachable part of the cord is damaged, it should
be replaced by the producer or at a proper service point
or by a qualified person in order to avoid any hazards.
The appliance can only be repaired by qualified service
personnel. Improper servicing may cause a serious
hazard to the user. In case of defects please contact
a qualified service center.
The appliance is intended for domestic use.
●
In case it is
used for food business purposes, the warranty conditions
shall change.
Before the first use, wash thoroughly all elements of the
●
equipment.
Turn off the device and unplug it from an outlet
●
before replacing the equipment or approaching
moving parts during use.
Before cleaning, assembling or disassembling the
●
appliance, always unplug it first.
Immediately stop the operation and unplug the appliance
●
if any liquid gets into the motor. Return the appliance
to an authorised service facility for examination and
servicing.
Do not expose the appliance to temperatures exceeding
●
60°C.
Do not turn on the appliance if empty, without any
●
products in.
Be particularly cautions when the juice extractor is used
●
in the presence of children.
This appliance is not intended for use by persons
●
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure that they do not
●
play with the appliance.
Do not leave the appliance unattended when it is plugged
●
to a socket.
Do not put the appliance on wet surface.
●
Unplug the appliance after use.
●
Do not immerse the juice extractor’s motor in water, nor
●
rinse it with running water.
Do not use aggressive detergents for washing the casing,
●
such as emulsion, cleaning milk or paste which may,
among others, remove informative symbols and signs.
Do not use the juice extractor if the spinning strainer is
●
damaged.
Make sure that the lid is clamped securely in place before
●
motor is turned on.
Do not unfasten clamps when the juice extractor is in
●
operation and the strainer is spinning because the safety
system will cause the appliance to stop.
Use the pusher only to push food into the feeder opening.
●
Immediately turn off the juice extractor if you notice
●
strong vibrations or the rotation speed is reduced. Clear
the strainer and its cover.
Turn the motor off and unplug the appliance if food is
●
blocked in the feeder opening or on the grinding blades.
Remove the cause of blocking.
Use hard bristle brush for cleaning the strainer with sharp
●
grinding blade.
Do not use the juice extractor without pulp collector.
●
Do not overload the appliance with extensive amount
●
of product or do not push it to strong (with a pusher),
because a sudden increase of juice amount in the bowl
spout can cause the juice overflow out of the lid or into
pulp collector.
EN