47
381-131_v01
Technical data
Technical parameters are quoted at product nameplate.
Permitted motor operation time:
with mixers, whisks
10 min.
–
with mixing adapter or mixing cup
3 min.
–
Interval time before next operation (min.)
20 min.
Noise caused by the device (L
WA
):
with mixers, whisks, mixing adapter,
–
on the stand
80 dB/A
with mixing cup (mixer 381)
84 dB/A
–
The mixers are produced in II insulation class, they don’t
need grounding.
ZELMER mixers meet current norms requirements.
This device complies with Commission Regulation (EC)
no. 1275/2008 on eco-design requirements.
The devices meet the requirements of the directives:
Low Voltage Device (LVD) – 2006/95/EC.
–
Electromagnetic compatibility (EMC) – 2004/108/EC.
–
The product is marked with CE on the name plate.
Appliance elements
1
Mixer motor
2
Pusher button
3
Switch lever
4
Turbo button
5
Whisks or mixers sockets
6
Mixing adapter hole
7
Handle insert
8
Mixers: left/right with toothed bar
9
Whisks: left/right with toothed bar
10
Liquidising dics
11
Mixing attachment (The metal cap is available only in the
“Silver Line” series)
12
Cup
13
Mixing cup
14
Doser
15
Lid
16
Knife cup
17
Stand
18
Head
19
Grip knob
20
Fastening button
21
Rotating bowl
22
Blade
ZELMER mixers types
basic mixer equipment
additional equipment, which you can buy in shops
A
B
Device description
The mixer has 5 speed positions. The lever is used to
●
set up the particular rotation speed according to the
numbers:
0, 1, 2, 3, 4
, and
5
on pusher button, which
helps to remove (push out) the mixers or whisks from the
mixer motor part.
Additionally, the drive has
●
„turbo”
button which helps to
get the maximum rotation speed immediately, regardless
the speed set with the lever. Such buttons are placed
both on the right and left sides of the casing intended for
the convenience of both left and right-handed users. The
„turbo”
button is automatically blocked in
„0”
position.
There are 2 sockets (holes), for whisks or mixers
●
assembling, placed on the bottom of the motor part.
The insert handle, placed on the top of the motor part,
●
is made of the material increasing the comfort of holding
the mixer motor part.
There is a hole for mixing adapter or mixing cup
●
assembling at the back of motor casing. The hole is
covered with a mobile cover.
There is a clamp and a fastener in the lower part of motor
●
casing, for power cord winding around the motor casing.
Mixer start-up and position setting
(rotation speed)
1
Place the ON/OFF switch in the
„0”
position - the
leftmost position. Install the selected tool.
2
Plug in the appliance.
3
Switch on the appliance by sliding the switch to the right.
4
If you want to increase the rotation shift the lever in
position
„5”
direction, choose the desired rotation speed.
5
In order to increase the rotation immediately, regardless
set speed, press and hold one of
„turbo”
buttons (on the
right or left side of the casing).
6
When you want to return to the previously selected
speed release
„turbo”
button.
Preparing for operations
Operation with whisks or mixers
The whisks are intended to whipping eggs white foam,
●
cream, rubbing yolks with sugar, cream and pancakes or
omelettes dough preparation.
The mixers are intended to work the rubbed dough, yeast
●
dough, cheeses cakes, imbirbread cakes, etc.
The whisks and mixers shall be assembled in sockets on
●
the bottom of the robot.
1
Press until you feel the refusal – when the clamps get
fastened.
When assembled improperly, the parts fall apart
during operation.
2
Insert the mixer or whisk with toothed bar into the socket
marked with a star.
C
D
