Zelmer 28Z017, User Manual

Page: 54 / 56

54
Move the –
Steam Control Knob (7)
to
position.
Disconnect the iron from mains supply outlet. –
When the iron gets cool completely, store it –
vertically in a safe place.
It may be necessary to press the burst of steam –
button a few times to start this function.
For optimum steam quality, do not operate the
Burst Of Steam more than three times after the
pilot light goes off.
Hold the iron some centimetres away from delicate garments
(arti-ficial, silk, velvet etc.), otherwise they can be damaged.
Self-cleaning
This function removes the scales and minerals built up in the Steam
Chamber. The iron will remain in the best condition if this function is
performed at least once a month or more regularly depending on the
hardness of the water used.
Fill the water tank with demineralised water, or distilled water. (See –
How To Fill Water)”. Fill it up to the half.
Connect the iron to a suitable mains supply outlet (See the item –
„Preparation for operation”).
Turn the – Temperature adjustment knob (2) clockwise.
Control light (4) – glows, indicating that the iron is on.
Control light goes off when the required temperature is reached. The –
iron is now ready for use.
Wait for one more cycle; pilot light glows and goes off. –
After finishing move the – Temperature Dial (2) in anti-clockwise
direction to „ MIN ”; the iron is switched off.
Disconnect the iron from mains supply outlet. –
Hold the iron horizontally over a sink. –
Press and hold the – Self-Cleaning Knob (7) .
Steam and boiling hot water will drain from the holes on the soleplate –
washing away the scales and minerals that have built up inside the
Steam Chamber.
Gently move the iron back and forth until the water tank is empty. –
When Self-Cleaning is complete, release the – Self-Cleaning Knob (7)
.
Wipe the base plate with a damp cloth after the iron has completely –
cooled down.
Store upwards in a safe place. –
Caution!
Keep skin/body away from the hot water.
Anti-drip system
The system, which is designed to prevent water
escaping from the soleplate when the iron is
too cold automatically. During use, the anti-
drip system may emit a loud clicking sound,
particularly during heat-up or whilst cooling
down. This is perfectly normal and indicates
that the system is functioning correctly.
Draining the water
Move the – Steam Control Knob (3) to
position.
Disconnect the iron from mains supply outlet. –
Press the – Burst of Steam Button (4) , to release
any trapped water when the soleplate still hot.
Press the – Spray Buttons (5) , to release any
trapped water.
Turn the iron upside down and gently shake it to –
remove the remaining water.
Before storage make sure that Steam Control
Knob (7) is in position.
Cleaning and maintenance
Disconnect the iron from mains supply outlet. –
The iron should get cool completely before cleaning. –
Use a damp cloth and gentle washing liquid for cleaning. –
Do not use aggressive detergents like cream, milk, paste etc. to –