63
GW28-011_v01
Use
–
and
buttons to set
temperature (4 stage) or higher, according to „
Temperature setting
”.
The steam ironing indicator
shall appear on display. The iron is
ready for use.
Hold the iron between 15 and 30 centimetres
–
away from the garment.
Press the Burst of Steam Button
–
(3)
one
time – steam will shoot from the holes of the
soleplate.
Steam will penetrate into the garment removing
–
the wrinkles.
For stubborn wrinkles, wait a few seconds before
–
pressing the Burst of Steam Button again. Most
wrinkles can be removed within three presses.
It may be necessary to press the burst of steam button a few times to
start this function.
For optimum steam quality, do not operate the Burst Of Steam more
than three times in one cycle.
Build-in Anti-scale System
The build-in anti-scale cartridge is designed to reduce the build-up of lime
scale which occurs during steam ironing. This will prolong the working life
of your iron. However, please note that the anti-scale cartridge will not
completely stop the natural process of lime scale build-up.
Self-cleaning
This function removes the scales and minerals built up in the Steam
Chamber. The iron will remain in the best condition if this function is
performed at least once a month or more regularly depending on the
hardness of the water used.
The iron is equipped with feature of auto- reminding about self-cleaning
periods required by the manufacturer. The symbol
appearing on display
informs about self-cleaning time.
Fill the iron as described in How to Fill Water; fill the water tank up to half.
–
Place the iron vertically.
–
Connect to a mains supply outlet.
–
The display light shall go on and you shall hear single signal sound.
–
Then the display shall go off.
Use
–
and
buttons to set
temperature (7 last stage), according to „
Temperature setting
”.
Press and hold the control button
–
for about 2 seconds
to switch off the iron. You will hear single sound. Then the display shall
go off.
Disconnect the iron from mains supply outlet.
–
Hold the iron horizontally over a sink.
–
Press and hold the
–
Self-CLEAN button (10)
.
Steam and boiling hot water will drain from
–
the holes on the soleplate washing away the
scales and minerals that have built up inside
the Steam Chamber.
Gently move the iron back and forth until the water tank is empty.
–
When Self-Clean is complete, release the Self-Cleaning button
–
(10)
.
Rest your steam iron on its stand and allow to fully cool down.
–
Wipe the soleplate with a cold damp cloth.
–
Caution: Keep skin/body away from the hot water.
Anti-dripping
The system, which is designed to prevent water
–
escaping from the soleplate when the iron is
too cold automatically.
During use, the anti-drip system may emit
–
a loud clicking sound, particularly during heat-
up or whilst cooling down. This is perfectly
normal and indicates that the system is
functioning correctly.
Auto shut-off
The Auto shut-off feature will operate automatically when the iron is
unattended and it is connected to a mains supply outlet.
Attention: This feature does not work during first two minutes after the
iron is connected to mains supply.
Summary of Contents for 28z012
