Zelmer 28z012, User Manual, Page: 59 / 64

59 GW28-011_v01
Do not add perfumed, vinegar or other chemical liquids into the water –
tank; they can damage the appliance seriously.
The iron is not to be used if it has been dropped, if there are visible signs –
of damage or if it is leaking.
Do not use the appliance when it is damaged or performs abnormally. –
Do not roll the power cord or supply cord around the iron unit or base –
console for storage until it has cooled down completely.
Do not immerse the appliance in water or any other liquid. –
Do not touch the iron rest during or just after ironing. – It is hot!
Hints for ironing
1. Sort out the articles to be ironed according to the type of fabric. This
will minimize the frequency of temperature adjustment for different
garments.
2. Test ironing a small area on the backside or inside the garment if you
are unsure about the type of fabric. Start with a low temperature and
increase gradually.
3. Wait for about three minutes before ironing heat sensitive fabrics.
Temperature adjustment needs certain time to reach the required level
no matter it is higher or lower.
4. Delicate fabrics such as silk, wool, velour, etc. are best ironed with an
ironing cloth to prevent shine marks.
5. You may need a few times of press to activate the spray or burst function.
6. Read the garment labels and follow the manufacturer’s ironing
instructions which are often shown by symbols similar to the
following:
Temperature settings
○ Acetate
○ Elastics
○ Polyamide
○ Polypropylene
○ Cupro ○ Triacetate
○ Polyester ○ Viscose
○ Proteins ○ Wool
○ Silk
○ Cotton
○ Linen
Technical data
The iron technical parameters are included at the name plate.
Water tank nominal capacity: 200 ml
Iron rest– ceramic.
The iron is I class appliance, equipped with supplying cord and plug with
grounding.
ZELMER iron meets the requirements of effective standards.
The appliance meets the requirements of the following directives:
Low Voltage Device (LVD) – 2006/95/EC. –
Electro-Magnetic Compatibility (EMC) – 2004/108/EC. –
The product is marked with CE symbol on the name plate.
Get to know your iron
1. Handle
2. Water Spray Button
3. Burst of steam button
4. LCD display
5. Steam control ON/OFF button
6. LCD and temperature increasing
switch
7. Temperature reducing button
8. Water inlet cover
9. Spraying nozzle
10. Self- cleaning button
11. Cord grommet
12. Sole plate
13. Supplying cord
LCD display
1. Fiber setting indicator
2. Temperature growth indicator
3. Temperature reduction indicator
4. Steam ironing indicator
5. Temperature setting indicator
6. Maximum temperature indicator.
7. Operational status indicator (ready/
not ready for operation)
8. Automatic switch off indicator