Carl ZEISS
OPERATING CONCEPT
WSB ZPiezo CAN
Connecting the WSB ZPiezo CAN controller
10
432339-9010-000
07/2015
E
ng
lish
3
OPERATING CONCEPT
3.1 Connecting the WSB ZPiezo CAN controller
Connect the WSB ZPiezo Wheel handwheel input device to the HID socket (Fig. 3/
3
) of the
controller
Connect the stage attatchment connection cable to the Z-Stage socket
(Fig. 3/
2
). (see also
Section 5)
Connect the mains cable to the mains connection socket (Fig. 3/
9
) of the table-top power
supply unit.
Connect the table-top power supply unit to the R7B power supply unit plug (Fig. 3/
10
) at the
DC voltage socket (Fig. 3/
1
) on the controller.
An analogue voltage signal (0-10V), can be used to connect the respective system
components to the analogue in socket (Fig. 3/
8
) on the WSB ZPiezo CAN controller.
The controller can be connected to a PC card or other system components via the trigger
sockets
(Fig. 3/
4
).
The controller can be connected to a computer or other system components via the USB
(Fig. 3/
5
), RS232 (Fig. 3/
6
) or CAN port (Fig. 3/
7
).
Fig. 3
Connections to the WSB ZPiezo CAN controller
1
DC voltage socket
6
RS232 socket
2
Z-Stage socket
7
CAN sockets
3
HID socket
8
Analog in socket
4
Trigger sockets
9
Mains connection socket
5
USB socket
10
R7B power supply unit plug
