Carl ZEISS
OPERATING CONCEPT
WSB ZPiezo CAN
WSB ZPiezo Wheel handwheel
12
432339-9010-000
07/2015
E
ng
lish
3.3 WSB ZPiezo Wheel handwheel
The WSB ZPiezo Wheel handwheel input device (432339-9020-000)
permits operation of a
positioning system without requiring inclusion of a computer in the system.
In normal operation the LCD display shows the current position of the stage attatchment.
The three buttons enable execution of various functions.
Button 1: Pressing button 1 (Fig. 4/
1
)
moves the stage attatchment to its central position (start
position).
Button 2: Pressing button 2 (Fig. 4/
2
) deactivates the input device. No further positioning can be
performed.
In the “off“ condition the word “Info“ appears above button 1. Pressing button 1 (Fig.
4/
1
) with the input device in this condition prompts the display to list system-relevant
information.
Button 3: After the controller has been switched on, the WSB Wheel is set to fast mode (high
travel speed). Pressing button 3 (Fig. 4/
3
) switches the system to medium mode
(medium travel speed), pressing button 3 again switches the system to slow mode
(slow travel speed).
Fig. 4
Control and functional elements
1
Button 1 (“Centre“)
2
Button 2 (“on / off“)
3
Button 3 (“fast
/ medium /
slow“)
4
LCD display
5
Rotary knob for manual Z positioning
