4 Installation
Documentation set
SL 800
4.2 Installing the device
28 / 94
000000-2268-355-DokS-GB-300719
4.2 Installing the device
NOTE
Mechanical hazard
Incorrect installation may damage the device.
u
Never use the headrest to lift or carry the device.
u
To lift or carry the device, hold it only under the base plate of
the instrument base.
Action
1. Open the transport box and familiarize yourself with the
unpacking instructions.
2. Remove the upper part of the device packaging.
3. Remove the power supply unit and put it aside for later
assembly.
4. Remove the device and place it on the selected instrument
table or examination unit.
5. Use the screws supplied to secure the device in the corre-
sponding holes on the table top of the selected instrument
table or examination unit.
Figure 9: Installing the device
6. Cover the screws with the caps provided.
7. Carefully remove the red transport lock and keep it for future
transport.
8. If applicable, remove the supplied headrest and attach it to the
examination unit.
9. If the device is used on an examination unit with a separately
mounted headrest to which the slit lamp moves laterally, the
deflectors included in the optional cable extension kit must be
installed. Position the deflectors laterally to the headrest feet.
Fasten the deflectors to the table top using the appropriate
countersunk screws with diameter 4 (not included in the
Summary of Contents for SL 800
