Mechanical stage S mot. CAN
SET-UP
Measuring stage S mot. CAN
Connecting the mechanical / …
Carl Zeiss
08/2012
435465-9000-701
19
3.3
Connecting the mechanical /
measuring stage S mot. CAN
Connecting to the microscope system
•
Connect the stage directly to the corresponding
plug-in point
CAN HD15
of controller EMS 3
with the CAN extension cable HD15 (Fig. 9/
3
)
via the upper connecting socket (Fig. 9/
1
).
•
Connect SOCP 3 (Fig. 9/
5
) to EMS 3
•
In addition to or as an alternative to SYCOP 3
the mobile coaxial drive XY CAN can be
connected using the latter's connecting cable
(Fig. 9/
4
) via the lower connecting socket
2
) of the stage.
A device for transmitting a trigger
signal can be connected to the trigger
socket (Fig. 2/
1
) of measuring
stage S mot. CAN.
•
Connect EMS 3 to the mains supply using
power cable (Fig. 9/
6
).
Fig. 9
Connections on the mechanical /
measuring stage
