Operation
Mechanical stage S mot. CAN
Carl Zeiss
Measuring stage S mot. CAN
20
435465-9000-701
08/2012
4
OPERATION
Controller EMS 3 is indispensable for using the mechanical / measuring stage S mot. with SYCOP 3.
The stage function is controlled by the SYCOP 3 system control panel. See separate SYCOP 3 operating
manual
−
for operation under:
Home\Microscope\Function\XYZ Position
or
Home\Microscope\Function\XYZ Distance
−
for hardware settings under:
Home\Microscope\Memory\Hardware Setting
The
Invert Direction
function can be used to reverse the direction of stage travel. See
SYCOP 3 operating manual under:
Home\Setup\Mode\Stage
.
The
Fast XY
function can be used for rapid stage movements over longer distances. To do
this, assign the
Fast XY
function to a button (see SYCOP 3 under:
Home\Setup\Key
Settings\Buttons
) For quick positioning hold this button pressed while moving the joystick
accordingly.
If SYCOP 3 is not available on the microscope system, the mobile coaxial drive XY CAN can be
optionally used for external control of the stage (see Section 4.2).
The
Parcentricity Manager
can be activated on the SYCOP 3 for SteREO Discovery.V20 / V12
microscope systems with nosepiece S, coax 3x2 cod.
The Parcentricity Manager ensures that when the nosepiece is switched between the
Stereo Mode (3D)
and
Axial Mode (2D)
positions the object detail being observed remains in the center of the image. The
necessary compensatory movement of the object is performed automatically by the installed mechanical /
measuring stage S mot. CAN.
Opening menus:
Home\Setup\Mode\Stage
•
The function is activated / deactivated by
pressing the
Compensate 2D/3D Changes
button.
•
The LED lights up blue when the function is
activated.
The stage manager function is
automatically activated when using the
EMS 3. This ensures constant speed of
movement of object details in the
visual field.
Fig. 10 Activating/deactivating the
Parcentricity Manager
