ELYRA 7
Left Tool Area and Hardware Control Tools
ZEISS
03/2019 V_02
000000-2262-999
133
5.2.19
Scan Overview Image for Tiling
Pressing the
Scan overview Image…
button
opens the
Scan overview Image
interactive
window (Fig. 206).
Here you can define the number of
Tiles
by using
the
Horizontal
and
Vertical
Input boxes (the
extension of the scanned area will be displayed in
Pixel
and
Size (µm)
units), the objective from the
Objective
drop down menu and a potential zoom
factor via the
Zoom
slider or Zoom input box with
which to scan an overview image.
For widefield modes, only the zoomed in part of
the camera chip will be displayed.
Changing
Objective
and
Zoom
will change the
size, but leaves
Pixels
unchanged.
This overview image can then be used to navigate
in the sample (i.e. define positions for imaging).
Scan
starts the tile scan.
Cancel
closes the window without further action.
Fig. 206
Scan Overview Image window