RCF Microscopy Manual
5/2/2017
Authors Cory Nook and Chaowei Shang
Page 11 of 19
4.3 Channel Creation
Before you start an experiment, you can set up a naming system that will
be discussed in the appendix. In the toolbar, click on the icon labeled 6D-
Acquisition.
This will pull up the following window. Next to the Experiment tab, click
on the blue circle icon to select different channels to acquire. This icon
represents different fluorescent and brightfield channels, or multichannel.
If you have a file already saved and want to repeat those settings, you can
go to the Experiment section of the window and select either Load or
ReUse. You can also give a name to the particular experiment group by
editing the Image name in the Experiment section.
