20 - EN
Fitting
1. Remove the mounting plate from the Timer RF. The
mounting plate can be fitted to:
a. a flush-fit casing with the screws supplied;
b. the wall using the screws and plugs supplied (fig.
3);
c. a smooth (non-metal!) surface using the adhesive
strip supplied (fig. 4).
2. If necessary, place switch C in frame B (fig. 5) and
press the switch until it clicks into place.
3. Place the Timer RF on the mounting plate and press
it downwards carefully for about 5 mm until the Timer
RF clicks into place (fig. 6).
Note: The Timer RF is IP40 classified and should
therefore be fitted in zone 3.
Summary of Contents for Timer RF
