22 - EN
Connecting to the ventilation system
Control of multiple ventilation units with 1 Timer
RF.
If multiple ventilation units are to be operated with
1 Timer RF, then these ventilation units must all be
programmed with the same RF address. To do this,
set ALL ventilation units in the programming setting.
Press the “30 min.” and “timer OFF” buttons simul-
taneously for about 6 seconds until both indicators
light up red and then green. All the ventilation units
now have the same RF address.
1. Set the RF ventilation unit in the programing setting
by removing the plug from the socket and waiting 5
seconds before re-inserting the plug. You now have
10 minutes to make a connection.
2. Press the “10 min.” and “timer OFF” buttons
simultaneously until both indicators light up red and
then green. The Timer RF is now connected to the
ventilation system.
Summary of Contents for Timer RF
