EN - 11
Delivery scope
CO
2
RF main control unit
■
CO
2
RF main control unit;
■
User manual (sticker on CO
2
RF main con-
trol unit);
■
Fitter’s manual.
Note: Zehnder - J.E. StorkAir attaches great im-
portance to good user information. There is a
sticker on the main control unit with a manu-
al for the user. Please do not remove or open
this.
CO
2
RF upgrade sensor
■
CO
2
RF upgrade sensor;
■
Fitter’s manual.
Introduction
This manual is intended for fitters who will install
and perform maintenance on the CO
2
RF main
control unit and/or the CO
2
RF upgrade sensor.
This manual has been compiled with the great-
est care. However, no rights can be derived from
it. Zehnder - J.E. StorkAir also retains all rights to
change the contents of this manual without pri-
or notification.
Warranty and liability
Zehnder - J.E. StorkAir provides a 24 month war-
ranty following installation and 30 months as of
the production date. The warranty period com-
mences on the date of purchase. The warranty
becomes invalid if:
■
Installation has not been carried out ac-
cording to the applicable regulations;
■
The defects are due to incorrect connec-
tion, inexpert use, or contamination of the
system;
■
Parts have been used which have not been
supplied by the manufacturer or repairs
have been carried out by unauthorized
personnel.
On-site (dis)assembly costs are not covered by
the terms of the warranty. This also applies to
normal wear and tear. Zehnder - J.E. StorkAir re-
tains the right to change the construction and/or
configuration of its products at any time without
being obliged to alter previously delivered prod-
ucts.
Summary and principle
The ventilation system comprises a ventilation
unit with RF function and a CO
2
RF main control
unit, which have a wireless connection. CO
2
RF
upgrade sensors can be added. The main con-
trol unit can be used to select between CO
2
-con-
trolled ventilation or traditional 3-position switch
control. The main control unit should be fitted in
the living room. The upgrade sensors should be
fitted in the bedrooms. The sensors are not in-
tended for fitting on landings, hallways, toilets or
bathrooms.
The sensors and the ventilation system must be
aligned before remote control of the system is
possible. The procedure will be described in de-
tail elsewhere in this manual.
Electrical dangers
There is a risk of electric shock during installation
or maintenance.
Always comply with safety regulations in this
